and Transfer Valve
Filters and Strainers
Compact Filters and Strainers are ideally suited for liquid applications
with flows to 50 gpm and design pressures to 200 PSI. The simplex
is composed of one drawn carbon steel housing secured to a cast
iron cover with four heavy-duty bolts. It contains one filter element
or strainer basket.
incorporates two drawn carbon steel housings, each with one filter
element or strainer basket suspended from a common cast iron cover.
The shells are interconnected by a Nugent dual-circuit transfer
valve directing continuous flow to either shell independently or
to both in parallel. Options include steel covers, stainless steel
rotors, and all stainless steel construction.
Code Filters and Strainers
Code Filters and Strainers are designed to meet the exacting specifications
dictated by OEM’s oil companies, and engineering firms. Some
standard features include: a) convenient cover swing bolts for ease
of maintenance, b) cover O-rings for a leak-free cover seal, c)
lifting davits for all covers over 85 lbs. d) easy to read differential
pressures gauges on all vessels 16’’ in diameter and
larger, and e) heavy duty carbon steel bodies with ductile iron
or steel covers. All pressure vessels are available in stainless
steel construction to withstand the most corrosive environments.
your requirements, our filters and strainers can be designed to
meet API Specifications, MIL-Specs, NACE, ABS, USCG, and most engineering
Leakage Two-way Transfer Valves -
and 6-Port Advance Designs
dual circuit, 3-port and 6-port transfer valves are designed for
assembly between filters, strainers, and heat exchangers where continuous
service and positive shut-off are necessary. These valves feature
an exclusive internal quad-ring design, eliminating side-to-side
leakage even at test pressures to 1000 PSI. The operation of our
Zero Leakage Transfer Valve is much simpler than other valves because
there are no pads to seat and unseat and no locking pins to lift.
Our internal arrangement is free of all springs, pins, and levers
that break loose and cause severe damage to the costly equipment
it was meant to protect. After equalizing the pressure, simply rotate
the handle to transfer the fluid from one vessel to the other. Available
in 1-1/2”, 2”, 3”, 4” sizes. Designed for
operating pressures to 665 PSI. A steel body and iron rotor are
standard; stainless steel rotors or all stainless steel construction